Power Source : 100 – 240 V AC, 50/60Hz
Rated Output : 240 W
Power/Current Consumption :
- 314 W (Rated output), 70 W (based on EN62368),
- 200 mA or less (when power switch is OFF)
Frequency Response : 50 Hz – 20 kHz ±3 dB (1/8 rated output)
Distortion : 1 % or less at 1 kHz, rated power (20 kHz LPF (AUX-0025))
Tone Control :
- Bass: ±10 dB at 100 Hz
- Treble: ±10 dB at 10 kHz
S/N Ratio :
- 88 dB or more (Master volume: min.)
- 76 dB or more (Master volume: max.)
- 55 dB or more (INPUT 1 – 6)
- 72 dB or more (INPUT 7)
- (A-weighted)
Audio Input :
- INPUT 1, 2: -60 dB(*1)(MIC) / -20 dB (*1) (LINE) selectable, 600 Ω, electronically-balanced, removable terminal block (5 pins)/ø 6.3 mm phone jack (2P)
Note: MIC inputs are equipped with phantom power (24V DC, ON/OFF switchable) - INPUT 3: -60 dB(*1), 600 Ω, electronically-balanced, ø 6.3 mm phone jack (2P)
- INPUT 4: -60 dB(*1)(MIC) / -20 dB (*1) (LINE) selectable, 600 Ω, electronically-balanced, ø 6.3 mm phone jack (2P)
- INPUT 5: -20 dB (*1), 10 kΩ, unbalanced, RCA pin jack x 2
- PWR AMP IN: 0 dB (*1), 600 Ω, unbalanced, RCA pin jack
Audio Output :
- Speaker out: Low impedance (4 – 16 Ω) /
High impedance (DIRECT, ZONE 1, ZONE 2: 100 V / total 83 Ω), removable terminal block (6 pins)
(ZONE 1 / ZONE 2 is selectable, max. 120 W per output) - Rec out: 0 dB(*1), 600 Ω, unbalanced, RCA pin jack
Line out 1, 2: 0 dB (*1) , 600 Ω, unbalanced, RCA pin jack (Interlock with zone selection is possible)
Control Input :
- 2 channels. no-voltage make contact input, open voltage: 35 V DC or less,
Short circuit current: 10 mA or less, removable terminal block (5 pins) - ZONE CONTROL IN: No-voltage make contact input, even voltage: 35 V DC or less,
short-circuit current: 10 mA or less, removable terminal block (4 pins)
Control Output :
- POWER REMOTE OUT: Open collector output, withstand voltage: 30 V DC or less, control current: 25 mA or less, removable terminal block (4 pins)
- EMERGENCY OUT: Open collector output, withstand voltage 30 V DC or less, control current: 25 mA or less, removable terminal block (4 pins)
- ZONE CONROL OUT: Open collector output (polarized), withstand voltage 30 V DC or less, control current: 25 mA or less, removable terminal block (4 pins)
Indicator : 5-point LED output level meter, Power LED, Priority LED, Emergency LED, Thermal protection LED, Over current protection indicator LED, Zone 1 LED, Zone 2 LED
Operating Temperature : -10°C to +40°C
Operating Humidity : 85 %RH or less (no condensation)
Finish :
- Panel: ABS resin, black
- Case: Surface-treated steel plate, black, paint
Dimensions : 420 (W) × 96.1 (H) × 313.1 (D) mm
Weight : 4.9 kg
Accessory : Power Cord (2 m) x 1, Audio Input Removavble Terminal Plug (3.81 mm, 5 pins) x 2, Control I/O Removable Terminal Plug (3.81 mm, 4 pins) x 2, Remote Control Removable Terminal Plug (3.5 mm, 4 pins) x 1, Speaker Out Removable Terminal Plug (5 mm, 6 pins) x 1, Volume Control Cover x 4
Option :
- Rack mounting bracket: MB-25B
- Perforated panel: PF-013B
