Power Source : 220 – 240 V AC, 50/60 Hz
Amplification System : Class D
Power Consumption :
- 150 W (based on EN standards)
- 620 W (rated output 4 Ω × 2)
- 400 W (rated output 8 Ω × 2)
Input :
- 2 circuits, +4 dB* (1.23V) (input level control in max. position),
- 10 kΩ, electronically-balanced, removable terminal block (3 pins),
- XLR-3-31 type connector
- CH 1 mode ON/OFF switch (ON: PARALLEL, OFF: STEREO)
Rated Output :
- 2 channels: 250 W × 2 (4 Ω), 170W x 2 (8 Ω)
- 1 channel (BRIDGE): 500 W × 1 (8 Ω)
- M4 screw terminal, distance between barriers: 8.8 mm (0.35″)
Frequency Response : 20 Hz – 20 kHz (±1 dB)
Total Harmonic Distortion :
- 0.1 % (1 kHz)
- 0.3 % (20 Hz – 20 kHz)
Protection Circuit :
- Protection against excessive current flow due to overload
- short circuit, unusual DC voltage output,
- temperature rise at power amp. heat sink (100 °C (212 °F) or more)
- temperature rise inside the unit (80 °C (176 °F) or more)
S/N Ratio : 100 dB (A-weighted)
Crosstalk : 70 dB (A-weighted)
LED Indicator : Power (blue) × 1, Input (green) x 2, Output (yellow) x 2, Peak (red) x 2, Protect (red) × 2
Cooling : Forced air cooling
Operating Temperature : -10 °C to +40 °C (14 °F to 104 °F)
Operating Humidity : 90 %RH or less (no condensation)
Finish :
- Panel: Aluminum, black, alumite
- Case: Plated steel sheet
Dimensions : 482 (W) × 44 (H) × 401.8 (D) mm (18.98 × 1.73″ × 15.82)
Weight : 5.3 kg (11.68 lb)
Accessory :
- Power cord (2 m (6.56 ft)) x 1, Removable terminal plug (3 pins) x 2,
- Tamper-proof cap x 2, Rack mounting screw (with plain washer) x 4
