Skip to content

TOA VM-3360E VM Extension Amplifier 360W

฿100,000.00

The VM-3360E is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with the speaker output section which has an internal attenuator and 6-output selector. In addition, the unit features the surveillance function which automatically checks the system for failures.

หมวดหมู่: ป้ายกำกับ:

Power Source : 230 V AC, 50/60 Hz

Power Consumption : 850 W (with rated output signal), 380 W (according to EN60065)

Rated Output : 360 W

Frequency Response : 50 Hz – 20 kHz, ±3 dB (at 1/3 rated output)

Distortion : 0.7 % or less (at rated output, 1 kHz)

S/N Ratio : 85 dB or more

Input : External amplifier input: 100 V line, removable terminal block (14 pins)

Output

  • Speaker output 1 – 2: Max. (360 W) per output
  • Speaker output 3 – 6: Max. (120 W) per output
  • Speaker output 1 – 6: Total within 360 W, removable terminal block (14 pins)
  • Allowable minimum load: 500 Ω (20 W) at 100 V line for speaker line failure detection
  • Direct output: Direct output from internal or external amplifier,
  • removable terminal block (16 pins)

VM Link

  • Input: Connecting the VM-3240VA or VM-3360VA, RJ45 female connector
  • Output: Connecting the VM-3240E or VM-3360E, RJ45 female connector
  • Maximum distance: 800 m (874.89 yd)
  • Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)

EXT PA Link

  • Connecting the VP-2421, RJ45 female connector
  • Maximum distance: 5 m (16.4 ft)
  • Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)

General Control

  • Input 1 – 8: No-Voltage make contact input, open voltage: 24 V DC,
  • short-circuit current: 2 mA or less, removable terminal block (14 pins)
  • Output 1 – 8: Isolated open collector output, withstand voltage: 30 V DC,
  • operating current: 10 mA or less, removable terminal block (14 pins)

Emergency Control

  • Input 1 – 5: No-Voltage make contact input, open voltage: 24 V DC,
  • short-circuit current: 2 mA or less, RJ45 female connector
  • Input 6: Isolated voltage input, Inactive: -24 V ±20 %, Active: +24 V ±20 %,
  • RJ45 female connector
  • Status out: Relay contact output, withstand voltage: 40 V DC,
  • operating current: 2 – 300 mA, RJ45 female connector

ATT Control

  • Relay contact 1-6, 125 V AC or 30 V DC, total under 5 A,
  • removable terminal block (16 pins)

Power Input/Output

  • Power in: Connecting the VX-2000DS only (operating range: 20 – 40 V DC)
  • PS out: 28 V DC/24 A
  • M4 screw terminal, distance between barriers: 11 mm (0.43″)

DC24V Output : 24 V DC, Maximum feeding current 0.3 A

Ds Link

  • Connecting the VX-2000DS, RJ45 female connector
  • Maximum distance: 5 m (16.4 ft)
  • Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)

Operating Temperature : -5 ℃ to +45 ℃ (23 ゜F to 113 ゜F)

Operating Humidity : 5 % to 95 %RH (no condensation)

Finish

  • Panel: Aluminum, hairline, black
  • Case: Surface-treated steel plate, black, paint

Dimensions : 482 (W) × 132.6 (H) × 407 (D) mm (18.98″ × 5.22″ × 16.02″)

Weight : 19 kg (41.89 lb)

Accessory

  • Power cable (2 m (6.56 ft)) …1, Link cable (3 m (9.84 ft)) …2,
  • Plastic foot …4, Plastic foot mounting screw …4,
  • Removable terminal plug (14 pins) …3, Removable terminal plug (16 pins) …1